Seat belt Counter Plate or Belt Anchor Plate FIA - 65mm - GE50BS or bo – Palmside NZ

Seat Belt Square Back Plate 65 x 65 x 3mm with welded nut, locator hole & rounded corners as per FIA spec and suitable for MSNZ, if used by itself it must be welded in, otherwise you'll require use of the GE50CBS counter plate to be used on opposite side of panel in conjunction. Stock my vary from time to time from

Seat Belt Square Back Plate 65 x 65 x 3mm with welded nut, locator hole & rounded corners as per FIA spec and suitable for MSNZ, if used by itself it must be welded in, otherwise you'll require use of the GE50CBS counter plate to be used on opposite side of panel in conjunction. Stock my vary from time to time from that pictured.

This reproduction anchor plate is identical to original equipment that used to fasten the seat belts to the floor of your vehicle. Each anchor plate

Anchor Plate, Seat Belt, 1965-67 GM, Chrome

Backing Plate - FIA - Racetech NZ

Ford Seat Belts – Classic SeatBelts

Seatbelts Edge Performance Par

FuelTech FT PRO racing harness is FIA 8853-2016 certified. Features pull down straps for easy adjustment, camlock, 3” lap belt, 2” dual crotch straps,

FT PRO 6 Point Camlock Racing Harness FIA 2/3

Seats & Harnesses – Palmside NZ

Safety belt 2 pt red 65 Seat belts 2-point - Seat belts - Int

Seat Belt Square Back Plate 65 x 65 x 3mm with welded nut, locator hole & rounded corners as per FIA spec and suitable for MSNZ, if used by itself it

Seat belt Counter Plate or Belt Anchor Plate FIA - 65mm - GE50BS or both.

Backing Plate - FIA - Racetech NZ