Steel Wire Hanging System Looped End with Adjustable Snap Hook — Hang and Display

$ 1.99 · 4.7 (127) · In stock

15Kg Capacity Galvanized Steel Wire with preformed crimped loop and sliding adjustable snap hook LEAW31 Used to hang any signage and panels Pack of 1 (1 wire and 1 sliding snap hook) 3 meters of 1.5mm steel wire, one side is looped and securely crimped creating a preformed loop (roughly 35mm diameter or 50 x 25 mm tear
15Kg Capacity Galvanized Steel Wire with preformed crimped loop and sliding adjustable snap hook LEAW31 Used to hang any signage and panels Pack of 1 (1 wire and 1 sliding snap hook) 3 meters of 1.5mm steel wire, one side is looped and securely crimped creating a preformed loop (roughly 35mm diameter or 50 x 25 mm tear drop shape). The other end is professionally cut with heated blade to prevent fraying. The snap hook slides up and down the wire as long as both sides are pressed. When let go, it securely grips the wire. This system can be be adjusted and reused over and over. These high quality secure fasteners are made in Europe. Snap hook opening is 5mm wide. Use: Insert wire from top of hook while holding it with two fingers from both sides, push the wire in and it will come out the side, as long as you press the side release mechanism the wire is adjustable both ways. When you let go, the hook can only be pulled up on the wire and not down. This set can hold up to 15Kg in vertical position with a safety factor of 5. Pressing the sides of the clamp under load will release the clamp. Gripple® and Angel™ are a registered trademarks of Gripple Limited. World patented. One pack is 1 wire and 1 Sliding Gripple Angel Clamp

15Kg Capacity Galvanized Steel Wire with preformed crimped loop and sliding adjustable snap hook LEAW31

Used to hang any signage and panels

Pack of 1 (1 wire and 1 sliding snap hook)

3 meters of 1.5mm steel wire, one side is looped and securely crimped creating a preformed loop (roughly 35mm diameter or 50 x 25 mm tear drop shape). The other end is professionally cut with heated blade to prevent fraying.

The snap hook slides up and down the wire as long as both sides are pressed. When let go, it securely grips the wire. This system can be be adjusted and reused over and over. These high quality secure fasteners are made in Europe.

Snap hook opening is 5mm wide.

Use:

Insert wire from top of hook while holding it with two fingers from both sides, push the wire in and it will come out the side, as long as you press the side release mechanism the wire is adjustable both ways. When you let go, the hook can only be pulled up on the wire and not down.

This set can hold up to 15Kg in vertical position with a safety factor of 5.

Pressing the sides of the clamp under load will release the clamp.

Gripple® and Angel™ are a registered trademarks of Gripple Limited. World patented.

One pack is 1 wire and 1 Sliding Gripple Angel Clamp

Adjustable Picture Hanging Wire with Loop and Hook, Stainless Steel Wire Rope Cable, 2pcs Heavy Duty Frame Hanger Rope for Photo, Light Lamp Hardware, Mirror, Up to 44LB, Diameter 1/16 inch, 6.5ft : : DIY & Tools