$ 14.00 · 4.6 (257) · In stock
The D Series is a single tower desiccant air dryer designed for point-of-use applications. The rust-free powder coated aluminum housing is made in Canada and includes built-in brackets.
DESCRIPTION
The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications. The wet compressed air enters at the inlet, is first separated due to the off-set inlet creating centrifugal separation to trap water droplets, and subsequently passes around a polypropylene coalescer element, felt pads, and stainless-steel grids to remove solid particulates. The air flows upward through a sewed filtration desiccant bag that acts as a sponge to absorb moisture. Finally, the air flows again through the second filtration stage to eliminate any desiccant dust. This 3-stage system efficiently provides separation, filtration, and drying. It is time to replace the cartridge when the Moisture Gauge indicates saturation. The replacement is fast and mess-free, thanks to the US stainless-steel clamp. The rust-free powder-coated aluminum housing is made in Canada and includes built-in brackets. A superior alternative to Devilbiss DAD 500, Camair CT30, MP Filenco, Van Air Moisture Block.
SPECS
INLET / OUTLET PORTS: 1-1/2'' NPT
AIRFLOW @ 100 PSIG: 150 SCFM
MAXIMUM INLET PRESSURE: 150 PSI
MAXIMUM INLET TEMPERATURE: 100°F (38°C)
CRN: CERTIFICATIONS & PRESSURE RATINGS
PRE-FILLED WITH DESICCANT CARTRIDGE
PRESSURE GAUGES, SAFETY VALVE, AND BALL VALVE INCL.
UNIT WEIGHT: 50 LB
BOX DIMENSIONS: 22 x 12 x 9 PDF
PDF
FAQ
1. How long does the cartridge last?Typically we recommend changing the cartridge at least once to twice every year (or every 2,000 hrs) when used for point-of-use applications with an intermittent flow.2. When do I know when to change the cartridge?Use our moisture indicator HGT-1/4 and replace the cartridge when the R.H. exceeds 80%.3. Can I regenerate the desiccant?We highly recommend replacing the desiccant with a fresh cartridge for optimal performance. However, you may dry the desiccant by emptying the bag and leaving the activated alumina in an oven at 275 F for 4 hours (approximately). Let the desiccant cool down before refilling the bag. Use a commercial stapler to close the bag.
4. How can I extend the life of the cartridge?We recommend draining the tower daily by opening the ball valve or using our automatic timer drain TD-1/4. When there are bulk liquids in the compressed air, a water separator FSD Series installed upstream of the dryer will knock water and prevent the flooding of the cartridge.
5. Can I oversize my air dryer?Yes, oversizing the air dryer will increase the time in between maintenance.
Nano D3 Series Desiccant Air Dryer
24CFM D1 Heatless Modular Desiccant Air Dryer With Integrated After Filter By Nano - Warthog Air Compressor Store
/sites/default/files/Scree
D2 COMPRESSED AIR DRYER - 7 SCFM - 1/2 CONNECTIONS - AVP, Inc.
Basevac Standard Oil-less Dental Air Compressor D2.5 - 220 2880112
Ultra-High Purity Pneumatic Compressed Air Dryers
177CFM D2 Pneumatic Heatless Modular Desiccant Air Dryer with Integrated After Filter By Nano - Warthog Air Compressor Store
Desiccant Air Dryer - D Series
525CFM D3 Heatless Modular Low Dew Point Desiccant Air Dryer with Integrated After Filter By Nano - Warthog Air Compressor Store
45 CFM Desiccant Air Dryer
Altec AIR HRE Series Dual Tower Heated Regenerative Desiccant Air Dryer, Desiccant Air Dryers
Modular Heatless Desiccant Dryers 5-41 m3/h (3-24 CFM) - Air Production Service
Modular Desiccant
QHD Heatless Desiccant Dryer - Air Production Service
D2 - Desiccant Compressed Air Dryer
Desiccant Air Dryer Toronto or Guelph - Compressed Air International