Bondtech CHT™ BiMetal Coated Brass Nozzle - Filastruder

In stock, quantities limited. Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials. Nozzle is supplied with Nickel Coating. ALERT : Avoid Cold Bondtech CHT Nozzles Change Heat up the heat block up tp 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle. Use at most 1.0 Nm torque. They are manufactured by Bondtech in-house, and will fit the following hotends/blocks: Mosquito and Mosquito Magnum Mosquito Liquid Mosquito Magnum+ Copperhead E3D V4, V5, and V6 blocks E3D Chimera and Kraken RepRap M6  Main Advantages Copper body; Hardened Vanadium Steel inserts; Nickel Coating; 1 unit per pack; Available sizes : 0.40, 0.60, 0.80, and 1.0mm; Optimized for 1.75mm filament; Compatible with 2.85mm filament. Requires 6mm wrench   ALERT : Size limitation for fiber loaded filaments For Carbon or Glass fiber loaded abrasive filaments use

Bondtech CHT™ BiMetal Coated Brass Nozzle - Filastruder

This Bondtech CHT ® RepRap M6 (MOS) nozzle increases the melting capacity of your hotend, to build faster and to save your time. It also improves the

Bondtech CHT ® Coated Brass Nozzle for RepRap 1.75/2.85 heat blocks

Bondtech CHT™ Coated Brass Nozzle - Filastruder

Bondtech CHT Coated Brass Nozzles

This Bondtech CHT ® RepRap M6 (MOS) nozzle increases the melting capacity of your hotend, to build faster and to save your time. It also improves the

Bondtech CHT ® Coated Brass Nozzle for RepRap 1.75/2.85 heat blocks

Bondtech CHT® Coated Brass Nozzle MK 6 .4mm (1pack) - MOS Bondtech CHT Nozzle .4mm : Industrial & Scientific

Bondtech CHT ® Nozzles for high flow applications and strong parts

Bondtech CHT ® Coated Brass Nozzle for RepRap 1.75/2.85 heat blocks

Bondtech CHT BiMetal Coated Nozzle For Volcano Heat Blocks